1), appearance standards
1.Appearance of smooth, no shortage of classics, no jumpers. Qualified.
2.Neat edge profile control, no loose wires. Qualified.
3.Cloth no discount, take-up and tidy uniform elastic. Qualified.
4.Color wire spacing requirements ?0.5cm qualified according to regulations.
5.Discount rate according to process requirements +1 cm,-0.5cm qualified.
6.Fabric surface, no obvious oil pass.
7.Ji Buke re-Tolerance +2 g-4g. Qualified.
8.Wei failed in three or more dilute.
9.Broken by the tied-off by two or more than 1 m interval of less than seven failed.
10.Holes, he failed.
11.After jumping more than 3 failed.
12.Wei-hop for more than three failed.
13.Raising serious, he failed.
14.Apparent failure of color difference.
15.Oil, he failed.
16.Discount fabric coating failure.
17.Jingwei knot is too large too long failed.

2) tensile testing standards
1. 150g / ? below, with 150g / ? cloth, vertical = 1500N/5cm, horizontal = 1400N/5cm.
2. 150g / ? or more to 170g / ? cloth, vertical = 1800N/5cm, horizontal = 1700N/5cm.
3. 170g / ? or more to 190g / ? cloth, vertical = 1950N/5cm, horizontal = 1850N/5cm
4. 190g / ? or more of the cloth, vertical = 2100N/5cm, horizontal = 2000N/5cm.
5. Elongation <25 ?/p>